Pooler homeowners are upgrading their garages from plain concrete to professional epoxy floors, and for good reason. A coated garage floor is easier to clean, resists stains from oil and chemicals, and looks dramatically better than bare concrete. Global Painting installs commercial-grade epoxy and polyaspartic coatings in garages throughout Pooler, from the established homes in Savannah Quarters to the newer builds along Pooler Parkway. Our systems are rated for vehicle traffic and will not peel like the hardware-store kits.
Every project in Pooler follows our proven 7-step process for consistent, high-quality results.
Diamond-grind the concrete surface to create a proper profile
Repair cracks, spalls, and expansion joints
Apply moisture barrier primer to prevent delamination
Roll on base coat of 100% solid epoxy
Broadcast decorative flake or metallic pigment (if selected)
Apply clear polyaspartic or polyurea topcoat for UV and chemical resistance
24-hour cure time before foot traffic, 72 hours for vehicles
Materials: 100% solid epoxy base with polyaspartic topcoat -- not the water-based kits from the hardware store. Commercial-grade products that bond permanently to properly prepared concrete
Pooler is one of Georgia's fastest-growing cities, with a population that has more than tripled since 2010. Here is what matters for epoxy flooring in this area.
Many Pooler garages were built on slabs poured during the housing boom of 2010-2020 when construction timelines were tight. We frequently see concrete that was not properly cured or that has high moisture vapor emission from the water table. A moisture test is mandatory before any epoxy application -- we will not skip this step just to get the job done faster. We also see a lot of builder-grade garage floor sealer that must be fully removed before epoxy can bond. Diamond grinding handles both surface contamination and profile creation in one step.
Pooler sits just minutes from the coast, so the same coastal humidity that affects Savannah is a factor here. Builder-grade paint in newer homes often starts failing within 3-4 years.
Transparent pricing -- no surprises. Every estimate is detailed, line-by-line.
Prices vary based on condition, access, and scope. Contact us for a free, no-obligation estimate specific to your Pooler property.
Common questions about epoxy flooring in Pooler, GA.
A standard 2-car garage in Pooler runs $1,800 to $3,500. Three-car garages and metallic finishes are higher. Price includes diamond grinding, crack repair, epoxy base coat, flake broadcast, and polyaspartic topcoat.
Light foot traffic after 24 hours. Vehicles can return after 72 hours. Full chemical resistance develops in 7 days. We provide a written cure schedule with every project.
Our flake-broadcast systems include anti-slip texture. The combination of decorative flakes and polyaspartic topcoat creates a surface with good traction even when wet.
Free estimates, honest pricing, and work we stand behind. Call today or request an estimate online.